Sawing Double Column SWD-O 800 Automatic Double Column Band-Saw

GET A QUOTE

SWD-O 800 Automatic Double Column Band-Saw

Fully automatic Linear Way for cutting solid stocks, tubes and profiles of steel, cast-iron light and nonferrous material for cutting at only 90°. Complete steel fabricated. The rear jaw contains a number of hardened rollers driven through a worm and wheel by an electric motor. The front vice consists of a number of free running rollers. A limit switch assembled on top the vice stops the machine when the block is exhausted. Once the workpiece is clamped between the rollers no further clamping is needed. The work is fed through the vice to the bar stop which contains a micro-switch controlling the bar feed motor. A piece counter controls the number of the cuts. The machines stop automatically at the blade breakage. The machines are fitted with a removable coolant tank incorporating a submerged electric coolant pump which supplies coolant to both guide assemblies. Bi-Metal saw blade, Chips Conveyor and 1,2 meters in feed roller table are supplied as standard.


Technical Specifications
Capacity 90º Round mm 800
Capacity 90º Square mm 800
Capacity 90º Rectangle mm 800X850
Band Dimensions mm 6180X41X1.3
Boron Oil Depot lt 30
Hydraulic Storage lt 20
Blade Speed m/min 0-60
Main Motor kw 5.5
Cutting Speed m/min 20-100
Hydraulic Motor kw 1.1
Bor Oil Motor kw 0.09
Conveyor Motor kw 0.44
Working Height mm 605
Lenght mm 3400
Width mm 1550
Height mm 2600
Weight kg 3450

Hydraulic Vise
Hydraulic Blade Tension
Chips Conveyor
1.2 Meter Roller Table
Inverter
2º​ Inclined Blade
Chip Brush
Micro Spray
Hydraulic Top Clamping
3M Roller Table
3M Motorized Roller Table
PLC Control

Other Machines

Related Machines

CONTACT US FOR OUR MACHINES!